Brighten Up Your Home - Harbor Bay Ceiling Fans

Ceiling Fan Installation Guide

Ceiling Fan Installation Guide with Traditional

Ceiling Fan Installation Guide with Traditional

By Photographed in Philadelphia
Date uploaded: June 20, 2017
Ceiling fans can be difficult to install for the inexperienced do-it-yourselfer. In some cases, you will infatuation to manage an electrical stock to the place where the ceiling aficionado is to be installed. Unless you are proficient at perform this sort of thing, hiring a licensed, bonded and attributed electrician will more than likely save you much grief in the long run.

There is with the pubescent "con" that involves the matter of periodic maintenance. Properly installed, a ceiling aficionado will pay for years and years of genial cooling and cost-savings upon your heating financial credit (assuming you have a aficionado that allows you to reverse the blade direction). Granted, you infatuation to wipe the length of the blades when in a even though but then, everyone has household cleaning chores to put up with care of from epoch to time.

On occasion, ceiling fans get out of financial credit and infatuation pubescent adjustments. The most common culprits are directionless screws that append the blades to the motor housing, blades that are not at the same angle (pitch) as the dismount of the blades and a blade or blades that weigh slightly more than the others.

Without going into good detail, create clear that every the screws are tight. If they aren't tighten the ones that have come directionless and manage the fan. If the wobbling has stopped, your problem has been solved.

If not, use a yardstick or further straight piece of wood and place it (with the aficionado stopped) vertically at the outer edge of one of the blades. different the blades by hand to create clear that each blade touches the stick. If one or more don't, clearly (and gently) bend the blade(s) as a result that their pitch matches the others and repeat the process until you are satisfied that each blade has the same pitch. face the aficionado upon over and look if you've solved the problem.

If not, you've got a weight problem (I don't necessarily point toward you, personally). The weight problem is when one or more of the blades weighing slightly more than the others. This sometimes happens when the blades are made of natural, organic material such as wood. Manufacturers often append what are called "balancing weights" in the box when the ceiling fan. These can be used to compensate for any differentials in weight that may have resulted exceeding time. These "balancing weights", or clips as they are sometime called, can be attached to the summit of the blade as a result that they are roughly out of sight. start when one blade by attaching the cut near to where the blade is attached to the motor. manage the fan. If the problem persists, impinge on the weight out towards the stop of the blade. attempt government the aficionado again. If the problem persists, save touching the weight. If you are near the stop of the blade and still have a problem impinge on to the next-door blade. Continue this process until you find the one that has the weight problem.

While this is a somewhat time-consuming process, it will solve the problem when every else fails. By the way, if the manufacturer didn't supply any clips you can usually purchase these clips at a house middle or large hardware store. If you prefer, you can improvise by placing a coin or further little weight upon the summit of the blade and anchoring it when a little piece of electrical tape.

Thinking of installing a further ceiling aficionado in your room? after that you will infatuation to know how to pick the right one. Unfortunately, choosing a ceiling aficionado is not as easy as some may thing; in complement to design and looks, there are many further factors you will infatuation to put up with into consideration when assessing its satisfactoriness for your use. Here, we inspect some of these factors.

Purpose of the Ceiling Fan

Before shortlisting the right aficionado to install in your room, you'll infatuation to be clear of its purpose. Will it be the forlorn aficionado in the room or will it perform in tandem when further ceiling fans? Will it be decorative or dual purpose- both for lighting and cooling the room? Commonsensical as it sounds, there are many who overlook this step forlorn to regret their purchase decision because the aficionado they chose lacks the functionality needed.

Size of the Room

Size is the second matter to consider. The size of the room will be the main reduction of reference for choosing the size of your further ceiling fan. Even if you forlorn point toward the aficionado to be decorative, a tiny aficionado in a large room will look a tiny silly.

Type of Mounting

The next-door important consideration is mounting type. Your unusual of mounting will in the region of always be dependent upon your ceiling height. According the American Lighting Association, the ceiling aficionado should hang at least 7' above the floor, even though 8' - 9' is best, if the ceiling is high satisfactory to allow for that. Here is a financial credit of the various mounting types and how to pick amongst them:

Flush (Hugger Type) Mount - This is where the aficionado is anchored directly to the ceiling without the use of a downrod. This reduces the fall separate from of the aficionado and is as a result ideal for low ceilings or fans when low hanging lights.

However flush mount ceiling fans get have a major drawback; the airflow is in the region of always somewhat restricted in such fans owning to the no question unexpected separate from amongst the ceiling and aficionado blade. They are as a result not normal for rooms when unconventional ceiling as with ease as ceiling that are not flat.

Standard Mount - These usually use a 3' to 5' inch downrod and are the most common for rooms when 8' to 9' ceiling height.

Extended Mount - These are perfect for high or vaulted ceilings. The length of the downrod used is customized such that the aficionado is positioned amongst 8' to 9' above the floor for optimal airflow.

Control Type

Another factor to decide when choosing a ceiling aficionado is the unusual of manage types (i.e. pull chain, wall switch or standoffish control).

The pull chain is often the cheapest and most basic alternative. If aesthetics is not a consideration, it is no question a doable alternative.

The standoffish control, upon the further hand, is the most costly. This is not surprising because it is the most high tech unusual and offers the most convenience. A downside even though this that the standoffish manage can be easily misplaced especially if you have children in the house. The middle pitch solution is as a result the wall control; even though not as convenient as the standoffish control, you will enjoy the user-friendliness of always knowing where it is located (i.e. can't be misplaced).

As can be seen, aesthetics even though important, cannot be your forlorn consideration when choosing ceiling fans. The point toward of the fan, size of your room, height of your ceiling and even unusual of manage type should every be taken into consideration too, especially if you want to pick a aficionado that is both pretty and functional.

Comments